Go to the list of seismic processes.
Go to SIOSEIS introduction.
Program: lsd
Purpose: List a SEG-Y disk file
Usage: lsd [-K] filename [trace-inc ntodo long-list]
-K = List Knudsen's recording parameters from the trace header. (unprocessed sgy files only)
trace-inc = the increment between traces e.g. 2 means ever other trace.
ntodo = the number of traces to list.
long-list = any value indicates that various trace header information is printed.
Example 1:
>lsd Tjornes.35.stackG.746.2205 1 5
SHOT TR RP TR ID RANGE DELAY NSAMPS SI YR DAY HR MIN SEC
7267 1 746 1 1 600 0 2500 1000 2001 203 11 43 37
7267 2 747 1 1 587 0 2500 1000 2001 203 11 43 37
7267 3 748 1 1 575 0 2500 1000 2001 203 11 43 37
7267 4 749 1 1 562 0 2500 1000 2001 203 11 43 37
7267 5 750 1 1 550 0 2500 1000 2001 203 11 43 37
Example 2:
lsd 2009_275_1825_70873_3.5kHz_000.sgy 1 1 1
SHOT TR RP TR ID RANGE DELAY NSAMPS SI YR DAY HR MIN SEC
427 1 0 0 1 0 66 1719 38 2009 275 18 25 46
shot 427 tr 1 src 0 rp 0 tr 0 id 1 eog 0
fold 1 range 0 relev 0.0000000 selev 0.0000000 sdep 4.0000000 wdep 65.690002
time switch or shot time millisecond 2
source long -117 17 57.703758
source lat. 32 43 51.115608
Sweep frequency at start (Hz). 2031
Sweep frequency at end (Hz). 6031
Example 3:
lsd -K 2009_275_1825_70873_3.5kHz_000.sgy 1 1 1
SHOT TR RP TR ID RANGE DELAY NSAMPS SI YR DAY HR MIN SEC
427 1 0 0 1 0 66 1719 38 2009 275 18 25 46
shot 427 tr 1 src 0 rp 0 tr 0 id 1 eog 0
fold 1 range 0 relev 0.0000000 selev 0.0000000 sdep 4.0000000 wdep 65.690002
time switch or shot time millisecond 2
source long -117 17 57.703758
source lat. 32 43 51.115608
Sweep frequency at start (Hz). 2031
Sweep frequency at end (Hz). 6031
Sweep length: 0
PingStartTimeMS: 765
TxPower: 1
RxGain: 0
ProcessingGain: 0
Sensitivity: 0
MuxChannel: 0
EchoStrength: 0
PrimaryChannel: 0
PulseLength: 0
TxBlank: 150
SoundSpeed: 1500
StartDepth: 50
EndDepth: 100
EchoThreshold: 0
Heave: 0
HeaveLatency: 0
GpsLatency: 0
EventMarkCode: 0
EventMarkNumber: 1
Scaler: -10000
DataRate: 25799.795